Concrete project cutting is more complex than just a woodworking job. Since concrete isn’t an easy material to get through, a powerful and heavy-duty saw is required. It shouldn’t be difficult to pick a concrete saw, but you’ll want to make sure you’re honest with yourself about the length and difficulty of the project.
If you’re going to use your concrete saw on a professional job site, you’ll need to say you’re getting a high-quality saw. However, if you want to work on your back patio and improve your landscaping, there’s going to be a homeowner or consumer model right. We compiled a list of the top 8 concrete saws of 2020. Check the reviews and choose the right saw for your need. See also our recommendations on the best cabinet table saw, the best electric chainsaw, the best chainsaw, the best chainsaw sharpeners, and the best router saw.
Best Concrete Saws to Buy in 2020 – Reviews
1. Husqvarna K770 Concrete Saw – Best Overall
The Husqvarna K770 Concrete Saw has so many good features to cover all of them, so we’ll give you some of the key points to make you understand why the Husqvarna is moving to the top of the list.
This is a flexible saw that can be used to cut small holes and even to cut a curb or pavers. The Husqvarna has properties for handling dust, vibration, and sound dampening to make the saw user-friendly. The K770 comes with a one-year warranty for customers and no technical support. As much as we enjoy this saw, a professional outdoor landscaper or road work company probably won’t be a go-to-saw.
The Husqvarna is a 5-HP unit, and use water hookup has a very close and convenient fit. We don’t notice any leakage, and the total water flow into the unit is easy to adjust too. Overall the Husqvarna is a perfect concrete saw for the commercial residential/light user.
In short, we agree this is the best concrete saw of the year 2020.
Pros
- Low vibration
- Active air filtration
- Low fuel consumption
- Dust-sealed starter
Cons
- Difficult first start
2. Makita 14-Inch Gas Concrete Saw
The 14-inch MM4 concrete Makita EK7651H saw improvements out of the two-stroke engine used with a four-stroke engine in most gas-powered saws. While this does not translate to a significant power boost, it does have a host of other benefits. In a four-stroke engine, for example, you can use standard gas, as opposed to the 50:1 gas to oil mix required in two-stroke engines. That means you’re not about to have to mix gas and oil before use but you’re not about to burn the engine with the wrong ratio accidentally.
While no vision of this power will ever be described as “silent,” this model is quieter than competing saws of a similar size, which is something you can enjoy when using it. It also comes with a five-stage, foam-paper-nylon filtration device that does an outstanding job of keeping dust out of the engine and going to prolong its life considerable. This model, however, begins very gradually, often taking five or six pulls to turn over. It is much more expensive hundreds of dollars than our top model. However, it is powerful so you have to consider whether you value the four-stroke engine at such a premium over a two-stroke engine of equivalent power.
Pros
- Four-stroke engine
- No oil mixing required
- Lower noise
- Excellent filter
Cons
- Slow starting
3. Evolution Concrete Saw – Best Value
If you’re here to pick the value, then this is your vision. The Concrete Saw to Evolution is the best concrete saw for the money. The Evolution will cut in concrete, mortar, brick, and other materials. Even if this saw isn’t quite as big or as powerful as other ones, it might be all you need to do the job.
The Evolution has an electric motor but you’re not going to deal with a device as heavy and bulky as the gas-powered Makita. Also, you won’t have to worry about getting gas with you if you want the saw to operate.
When it comes to user experience and ease of use, this saw’s design is a good one. The saw comes with a 12-inch diamond saw, also at this low price. If you’ve lined up a couple of projects where you think you would like a concrete sight the Evolution is an outstanding choice. You won’t have to do any ongoing maintenance, and at this price point, you’ll actually save some money from having a professional do the work.
Pros
- Electric motor
- Low maintenance
- Fast blade changes
- Price
Cons
- Corded electric tool
4. Metabo CM4SB2 Concrete Saw
The Metabo CM4SB2 is one of the most portable models on our list, but it does have some big flaws to remember. It is a revolving saw which means it operates differently from the previous ones. With a one-touch standard, it has simple depth adjustment, which comes in handy if you’re just cutting part of the way into something. It’s also low-vibration, so you can last longer with this method than you would have with others. It also weighs half to a third of what other models weigh on this list, making it a decent choice for someone who doesn’t want to get stressed out by their tools.
But this is a circular saw, and there is no bevel modification of any kind. There are some concerns about the saw not coming at a perfect 90-degree angle, so there is some opportunity for frustration, especially if you need perfect 90-degree cuts to the job you are doing. Equally, at best it has average capacity. This isn’t an industrial-powered platform, but it’s a decent choice for people doing research but lacks the capacity for certain types of construction work.
Pros
- Easy depth adjustment
- Low vibration
- Weight
Cons
- No bevel adjustment
5. SKILSAW Worm Drive Concrete Saw
The SKILSAW SPT79-00 Worm Drive Saw is a worm drive saw, as the name would suggest. That means it’s narrower and longer than a circular saw with direct drive. This makes it ideal for cuts in small areas, which usually means it slices with the same amount of strength it uses a little faster. This model is electric, which means it’s a low cost, but if you wish to use this saw, you must still have a power outlet installed. It comes with retractable pointer guides which make it very easy to follow a pre-drawn line.
This model is compatible with a dry or wet dust control system and it is secured by GFCI, so you’re able to use water with it even though it’s an electrical device. The dry dust control system, though, doesn’t work the best and results in more dust being left behind. It can support only 7′′ blades, too. That means that with our top models, which use 12′′ or 14′′ blades, you won’t get about as much range as you can with. Overall, this model has its applications but you won’t get the same range or speed you would find from a bigger saw.
Pros
- Wet/dry dust management
- Electric
- Retractable pointer guides
Cons
- Inefficient dry dust collection
6. XtremepowerUS Concrete Saw
The XtremepowerUS wet/dry cement saw is a very powerful beast, fitted with a 14-inch blade fed by 15 Amps. It’s electric, so no gas or oil is required and it’s never hard to get started. Tie your hose and you’ll get steady streams of water to keep the blade cool and comfortable while you’re making your cuts. That said, in order to have a connector for your hose you would need a trip to the hardware store because this tool doesn’t have one from the factory. The motor has overload shut down to avoid overheating which means we had to work in two-minute intervals. Although this is perfect for the durability of the tool, efficiency isn’t perfect at all. This saw is priced quite moderately, which puts it in the range of most homeowners.
Pros
- 15 amps
- Affordable
Cons
- Needs hose connector
7. Husqvarna K4000 Concrete Saws
This strong Husqvarna 15-amp wet saw makes fast work of regular cement cuts, but it misses a few essential features. It’s priced at a premium but we’re not going to see missing some important features.
This saw is fully electric and is powered by a normal outlet for home use. That is, it didn’t help the cuts as fast as a gas saw might. It is a burly saw, at 17 pounds. And most saws with this size and weight have a set with rear wheels that allow the saw to sit on during operation, allowing it to slip forward while cutting. Unfortunately, there are no such wheels on this build. This makes it harder to use. Another thing that’s missing is the saw, so you’ll have to shell out, even more, to pick up your new saw.
Pros
- Electric
- Very powerful
Cons
- No rear wheels
- Doesn’t come with a blade
- Very high priced
- Have to work in 2-minute intervals
- Small blade
- Not very powerful
8. Makita 4100NHX1 Concrete-Saw
This Makita cement saw is very small and lightweight. It has a shallow cutting depth of 13⁄8 inches but you’re not going to need it for anything major. But at just 6.5 pounds, it’s very light and much more manageable than the large wet saws. That’s one more drawback, of course. This is not a wet saw, this has no water hookups.
For the compact 4-inch blade size, the 9.6-amp motor is powerful enough but it easily slices through concrete with little effort. While this saw works well and is powerful sufficient, because it can’t always make a cement saw’s large cuts necessary, it’s capped out in the eighth position on this list.
Pros
- Portable
Cons
- No water hookups
- Small 4” blade
- Only makes 1⅜” cut
Conclusion:
Our suggestions above are what we found are presently the Best Concrete Saws. These are the Best Concrete Saws to buy in every price range for you. We have analyzed the features and functions of each product and reviewed our best for the buyers.